Not Helping.....

Yeah, it's videos like this that only fuel my desire to get a quadcopter/drone.  Being able to reach new heights, different angles and new perspectives to my video and photography would be huge.  This may not be new to you, but totally worth a second look.  

Seeing videos from YellowstoneFly/PescaPatagonia like this and others demonstrates how the game really does change when you open up new perspectives.  I've watched this a few times and each time it's got me jonesing to be on the water chasing steel and wanting more and more a DJI Phantom 2 or the new Inspire1.  

Aerial footage from winter 2014. I'm finding that non-winter time videos are lit better and easier to shoot. I look forward this summer, waking flies under the drone to large BC risers. Music by Dexter Britain "On My Way Home" Fishermen: Justin Spence, Jared Cady, Matt Klara, Chad Smith Camera/Pilot/Edit: Chad Smith Location: Skeena Country Software: CC 2014 Gear: DJI Phantom 2 with 3D Zenmuse Gimbal, Gopro 3+ Black at 2.7K Medium 30fps Protunes, Camera Raw

On Ice

Ice fishing is very much like fly fishing. If you believe that, I have a snowy bridge in Brooklyn that I’ll gladly sell to you for a song.

Ice fishing is technological fishing. That is, without electronics, you’re probably not going to catch much aside from cold feet and fingers.

I had thought it would idyllic, you know, go out on the ice, drill a couple of holes, sit in a tent and catch fish, drink a couple of beers, catch a few more fish, have a fish fry with more beer and enjoy the outdoor experience.

Not even close.

It all starts with an ATV and two sleds. One is a clam shell, the other is for equipment: an ice auger, electronics, spud, shovel, buckets and bait. My son drives an ATV built for two, I ride on the back for ballast.

We roll from the garage to the lake. It is quiet at seven am and we roll six miles to an ice shack, it’s not really a shack but a well-equipped trailer: stove, heater, music, TV and six holes in the floor. My son has to go to work so leaves me at the trailer to fish for crappie. It’s a good morning bite and I pull up a half dozen or so between ten and fourteen inches. I listen to music by the American Composer Aaron Copland and wonder, how would he have written a piece to honor ice fishing in Wisconsin?

Would it start in the minor tones with a quiet but eerie sense? Would he have added the sound of the rattle, as the trailer I’m in is equipped with reels and rattles?  Would he capture the moment a fish takes the bait and then the action as all hell breaks loose in the trailer as three rattles go off and the fisherman is trying to set the hook and harvest his catch? Could he make music that would reflect the use of electronics and the faces as they peered at them as if they were some sort of mystic video game that let them see the world beneath them in colored lines that moved up or down till the fish struck the bait? Would he add the ice singing as it splits and moves or how we he add the low tones that are produced when making ice?

My son opened the door, “What are you playing, we’ve got Greenday and you’re listening to this?”

Later we would venture out on the ice, drill holes and chase fish. Imagine if you will, fan casting. But instead of casting a line, you drill a line of holes. Like fan casting, you go to your left, your center and right. Sometimes you drill four holes out sometimes three. Then drop electronics, check for fish, if there’s fish, you sit and fish. If not, you move onto the next hole. The GPS and flashers are your best friends on the ice. Once again, technological fishing, the GPS allows you to locate bends, bays, drop offs, and slots where fish hang for the winter. The flashers tell you if there’s fish there.

We fish for four days. We Swiss cheese the ice in a number of places and we caught fish. I tied an ice jig that worked okay and caught a couple of perch. We caught bluegills, crappie and perch. We set-up tip-ups but no fish seemed to want the bait on those days.

I have fished a few times on the ice but never at night. We took a trip out in the dark, the stars so bright that you know you must not be alone in the universe. The moon provides enough light for shadows and the sound of owls and the occasional coyote punctuate the night. The snow sparkles like cold fire and the bite comes on.

One night a truck rolled out onto the ice. Firewood was unloaded, holes were drilled, beers were lifted to the sky and a bonfire was started. The dogs ran about on the ice while the fishermen sat and talked and played AC/DC on their truck radio. I was struck by the incongruity of a bonfire on the ice. But after they walked over an offered me a brat, I figured, this is it isn’t it?

A night under the stars, fishing, a fire nearby, your favorite music, a dog, friends and family.

The ice is a gathering place. There are dangers, but there is mystery. There is the sound of the ice splitting, moving, and groaning under its own weight.  Finding and catching fish is the goal, battling the elements to achieve that goal is just part of being on the ice.

But it’s not like fly fishing. Even if you go steelheading, which is about as close as you can get for an analogy. Nope, ice fishing is more about the gathering. About people leaving their homes and venturing out on the ice and exploring the mystery beneath them. About a community that knows, it’s only temporary and in about three months, the sheds and trailers will be taken back to storage, cleaned and put away. It’s about being out there.

I didn’t see that many drunks but I saw people drinking at 8:00am. I saw people catching fish and putting them back into the lake, so not all ice fishermen keep everything they catch. I met a number of good folks while sitting on a bucket, got my face licked by Gunnar, a very large black lab who was patrolling a section of lake and I was nearly pushed off the bucket by a friendly Golden Retriever.

I still prefer a summer day with a fly rod over a winter day with an ice auger. But I have a greater respect for those who go out on the ice, brave the elements in search of that mystery, in search of fish whether for lunch or for sport. The ice holds the mystery even more.

So I thank my son for introducing me to a way of fishing that I have never known and tended to make fun of. For showing me the value of electronics and how to enjoy the weather. Also for the loan of warm gloves and bibs. It was a most interesting vacation.


Stuart Van Dorn


Folsom Custom Skis

There are a handful of websites out there that will often feature how specific products are made.  Whether it be artisinal foods and beverages, small shop manufacturing, or some of our favorite products and brands.  It's always fun to learn how some of our favorite things go from an idea through design and development and in to manufacturing.  

With so many more small custom shops open, the "specialized" marketplace is booming.  As more manufacturers are coming back to the US and setting up shop, there seem to be more and more producers of gear customized to the end user gaining marketshare.  It's fun when these types of companies open their doors and show you why you may spend a bit more, but get something more unique than anything you can buy off the shelf.  

Gear Patrol is one of those sites that's always providing some great content, and the chance to peel away the curtain and get a look behind the scenes.  In this case Folsom Custom Skis shows you how they're breaking the mold of the "off the shelf" ski, and are meeting customer needs at a whole new level.  

Next time you're carving up a mountain, maybe this will give you a bit more appreciation for the equipment that'll make or break your day.  

 

West River Artwork - Ben West

While in Indy at the Fly Fishing Expo, I had the chance to meet and connect with quite a few great people.  One of which was a local artist named Ben West.  He's a young and up and coming artist who's got quite the fishy side.  

Ben's booth had a few of his paintings, both large and small, as well as a sketch book that featured some amazing drawings and water color paintings.  

What's great about Ben is he's an extremely knowledgeable fly fisherman and local to the Midwest.  With both a passion for guiding and fishing, he seems to bring both those to life on canvas and in his sketchbook.  

We're hoping to have Ben featured later on this year and get to know him a bit better, but in the mean time, check out his Facebook page here: BEN WEST.  

Early Season

“Any chance you can get away for a day this weekend?” I asked. 

“Possibly on Saturday, but I gotta be back by about five.  Isn’t it supposed to be in the single digits this weekend?” he replied. 

“Yes to both.  But there was a bit of open water last weekend, and I didn’t land a fish.  So, better to freeze my butt off with a buddy, than by myself.”  I countered.  “Pick you up around quarter to five?”

“I’ll let you know on Friday.  Just don’t like fishing when it’s that cold.”  he said. 

We connected once or twice before Friday and with the temps still predicted to be around eight degrees before windchill, I thought the chances were slim. But I felt the tug of the water, and really wanted my first fish of the year. 

My phone went off late Friday evening with a text – “see you at 5”.  We were on…

I loaded up the gear in the darkness of the early winter morning.  As the truck rumbled to a start, I tossed in my fishing gear and cameras, and ran back inside to let the car warm up, pour myself a cup of coffee and fill a thermos of the same.  It was going to be a cold day, I tried to enjoy the warmth while it was available. 

Turning the lights off as I rolled in to his driveway, he popped out the door ready to roll, with an armful of clothes matching mine.    With more clothes than we could ever wear, we were determined to stay warm. 

The three hours went quick and we watched the sun begin to pour in to the valleys, revealing the hill tops, melting the overnight frost.  From inside the car it actually looked warm out there.  The outside temp gauge reading twelve degrees told me otherwise.

Barren corn fields covered in snow can be a beautiful thing.  The rolling hillsides painted in white and brown are a stark contrast to the lush green farm fields and valleys of summer.  Rolling up to our normal spot we noticed it was still frozen over.  As we drove along further upstream, we began to notice spots of open water.  We layered up in the car, tossed on our waders and were headed to the stream in no time.

As we approached the water, I told him to take the lead.  He slowly led the way upstream, working the little open water there was.  With every bend, more and more of the stream presented itself, finally revealing moving water from bank to bank and the chance to make a decent presentation. 

Working our way upstream around a corner, the familiar rings of a trout rising rippled across the water.  I told him to make a few more casts and get ready.  As I pointed out the spot, the fish rose again.  It would require a bit of a tough cast and he didn’t seem up to it, as he looked and me and said,  “It’s all you on this one.”

Since he was handing over the reigns, I took my time and tied on a size 20 Adams and straightened my leader and tippet.  This was my first shot at a fish in 2014 – I didn’t want to mess this up.  As I readied my rig and got in position, he grabbed the GoPro from his bag and said “Whenever you’re ready, let’s do this.” 

A couple of false casts and I laid out a beauty.  About ten feet ahead, perfect drift, a nice mend, and a slow rise.  As the fly disappeared from the surface, leaving only a slight wake, I raised my rod, setting the hook and connecting with satisfaction.  As I stripped in a cookie cutter Driftless brownie, the cold left my body and the warm sensation of contentedness set in.  The ultimate in my book – seeing a rising trout, and outsmarting him for just a second, and bringing him to hand.

Is it Early Season opener yet?


The Town Ninja

RA Beattie is at it again with Simms Films as he follows a local, Tim Yochum, around Bend, Oregon and his passion for chasing trout.  It sounds like this is the first installment of, what is hopefully, at least a few more.  

These are the types of stories that epitomize many of the guys I know.  Reminds me of myself at bit.  Those of us that don't get the chance to live our lives on the water, often spend it locked up in an office, car or truck, a mill, a workshop, or any other place as far from nature as possible.  The guys with a fly rod and box of flies in their back seat, or trunk, ready to go at a moments notice.  The guys who come back from lunch with a bit of mud on their dress shoes because they were chasing bluegill in a neighborhood pond.  These are the guys and gals who really show the drive.  Honestly, I think the Tim Yochum's of the world are more common than not.  

 

RA Beattie and Beattie Outdoor Productions seek out anglers who live to fish. In their hometown of Bend, Oregon, Timmy Yochum is one who spends as much of his time on the water as possible and reminds us of the drive to fish. Check out the first installment as RA follows Timmy's adventures.

Work Meets Play

I've not been shy in the past talking about my job.  I love working in manufacturing technology because of all the great things I get to see and learn everyday.  My day to day job is like watching an episode of "How It's Made".  It's even cooler when I get to see my hobbies cross over in to my work life.  

A while back, while wandering the web, I bumped in to a post on the Classic Fly Rod Forum that discussed the idea of 3D printing a fly fishing reel.  Along a number of posts, the original designer and producer of, what is thought to be, the first 3D printed fly reel chimed in.  His name is Mike Hackney and he has a website and offers the plans for his reels via his site, The Eclectic Angler.  Mike has been able to design and print a working fly reel of the click pawl kind and it looks awesome.  

The reel is built/printed out of PLA, but ABS or Nylon would work as well.  The material starts as a thin plastic string (imagine weed wacker cord), and is heated up to a temp just above it's melting point as it's extruded out a tip (imagine a hot glue gun).  This tip will trace and outline the part, extruding and building the reel up layer by layer, typically in the range of 38-75 microns.  As the part is built and the hundreds of layers are laid down, they will continue to cure and strengthen their bond as this all takes place in a heated build chamber. 

It's been a busy few weeks for Mike as more than a few media outlets, including Field and Stream, have reached out and gotten the low down on his reel(s).   Joe Cermele from Field and Stream even went as far as taking the reel out to the stream and testing the clicker mechanism and it performed very well.  

If you're looking to get your hands on one, you can buy a 3D printed reel directly from Mike by visiting his website.  And if you're looking to learn a bit more about 3D printing, don't hesitate to drop me a line, or Google it.  You'll be amazed at what people are doing.  I've got customers that have 3D printed a full suspension titanium bike frame.  It's pretty sick what you can do these days with technology.  From designing custom products online, to manufacturing things that weren't possible before, 3D printing will really be a game changing technology for manufacturing. 

 

 

Indiana Fly Fishing Expo - Take Two

Stuart gave you his run down and photos earlier this week, but I wanted to give you another perspective and a few more photos.  

As we rode out to Indy on Friday night, in between the bouts of white knuckle driving and trances of concentration, we discussed the next day's events and what we each wanted to do and who we wanted to meet.  With Stuart looking to focus on hitting up and meeting most everyone, I decided to play it a little more low key.  He had the whole event covered, so I was free to bounce around.  A buddy was planning on coming down and wanted to meet up, and as Austin was letting us crash his booth, I figured I'd help out where I could.  

All in all, I met some great people from the Midwest and learned a lot about a bunch of different fisheries.  It was good to see Tony and Kim Ferrie from Dry Fly Sales and Simms, great to catch up with Paul Transue of Schmidt Outfitters, a pleasure to finally meet Dave Hosler from Pile Cast as well as Mike Schmidt from Angler's Choice Fly, Wendy and Larry from Hayward Fly Fishing Co., Mike Schultz from Schultz Outfitters and his team, Greg Senyo from Steelhead Alley Outfitters, the guys from Stealth Craft, Lee from Clutch RodsChris Willen the musky legend, Matt Wagner from Driftless Angler and Ben West, the local artist who happened to be at the show.  

Most importantly, I wanted to thank Austin from Grab Your Fly Charters, who allowed us to crash his booth.  He introduced me to a lot of great people, and as always, it was great hanging out.  

Be sure to visit your local shop or contact one of these awesome guides and outfitters to schedule your day on the water.  It's always a treat to get out and learn from some of the best.  Even if it's your home water, it seems there's always another tip or trick you can pick up that'll make a world of difference.  

Autumn Tailwaters - Matt Novak

Saw a recent short film that caught my eye.  Had some great footage, good story lines and who doesn't love a fly fishing flick?  

Matt Novak is a great designer and photographer and has quite the portfolio.  If you're looking for more on Matt Novak, give his website a look here: MATT NOVAK.

 

Indiana Fly Fishing Expo - Stuart

Gordy is Brad's dog. He's a cross between a hair curling kit and a Brillo pad. He watches from his perch by the window and announces my arrival. It takes a minute for him to warm up to me but before we leave he’s stopped acting like he wants to eat my shoes.

It's going to be about a four hour drive, maybe more considering the weather. Brad got a call from our buddy Austin that the roads were icy and that traffic was horrific. At moments during the drive, the wind would shove at the truck and I'd think about the semis that we'd seen in the ditch looking like some bent and twisted child's toy. Brad stared out the window, running ten below the limit as the wind and snow buffeted the truck. Not once during the drive did the thought occur, "Well this is just nuts."

There are those that say, "It's not an adventure till something goes wrong." However the truth is, it's an adventure when there is the possibility for something to go terribly wrong.

We arrived safely, found the hotel, checked in and headed for the bar. It's easy to find a group of fly fishers, although the two drift boats in the parking lot gave it away. However if you see a group of people huddled over their drinks, all wearing baseball caps with either a fish logo or their sponsor's logo and people are wearing fishing shirts, cargo pants and there's some guy waving his arms and telling a fish story, or phones are being showed around and there's a picture of guy with a fish, yep you're at the right place. Brad and I found the crew, drank a couple of beers and my age caught up to me.

The next day we checked out of the hotel and headed for the show.

The fairgrounds are near the hotel and parking is five bucks.

We find the building and head in. One day pass is ten bucks.

We find Austin and stow our gear at his booth.

I pull out a camera, load in a couple of CF cards and roll with a 70-200. Brad goes with his 24-105. A part of me kicks myself for not bringing the 100mm macro. But for the most part I'm there just to document the show and meet people. (Also to find some good smallmouth fishing spots and steal fly tying ideas.)

The show is like any fly fishing show: tables, booths, displays, casting area, special guest, this year Bob Clouser, and presentations. What makes any show fun is a couple of things:  looking for the people that seem slightly out of place or at their first show, making new friends, talking to the local fly tiers about their patterns and asking about good places to go fishing.

For me, what made my day great was getting to know one of the coolest couples I'd ever met, Wendy Williams and Larry Mann, owners of the Hayward Fly Fishing Company. We'd just met the night before in the bar and I'd asked Wendy, "Why do you fish?"

When I came by their booth she told me she'd been thinking about that question, "I love fishing because I love beginners, especially that person who’s never caught a fish. We get them to cast enough to get the fly out there and then work our butts off to get them a fish and when they do, it's all chaos and craziness. Just knowing that I'll be part of that memory is an honor for me. Look, it's not about numbers or size, it's about being out there, about the fun and joy of fishing. And I just love it." So for me that was the highlight of the show and if you're thinking about smallmouth bass, or musky and you want to spend some time with someone who "loves being out there" check them out: haywardflyfishingcompany.com, I know you won't be disappointed.

I also met another couple, they're retired and they run the Yountsville Mill and Inn which is located on Sugar Creek, a well-known smallmouth bass fishery. She is an artist and her husband a pianist and there they sat, looking a bit out of sorts with no logo wear, so I sat with them and learned about the restoration of the mill that was built around 1864 and I look forward to spring when I promised I’d return to visit them, fish Sugar Creek and try out their gourmet breakfast. You can check them out at: yountsvillemill.com, it's a reasonable drive from Chicago and as much as I like going north, going south might prove to be just as much fun.   Yountsville Mill Facebook 

As it is a most shows, I caught up with some old buddies, the boys from Tightlines, who will celebrate their 15th year, Tim and the gang were there with their own brand of craziness as well as new flies and new stories of drifting some of the prime waters in Wisconsin. If you’re reading this, you probably already know his website:  www.tightlinesflyshop.com

I stopped by a booth where a guy had some of the neatest little foam flies that I'd seen. Jack Harford had a fly he called Harford house fly which I took some pictures of and he was kind enough to give me a copy of the pattern and I'm certainly going to tie this pattern with the group. This was his first show and he's getting his feet wet selling flies and furled leaders. I like the leaders by the way, he skips the tippet ring and makes a loop for a loop to loop connection with tippet material. Heck of a nice guy, and anybody who’s got a Jack Gartside story to tell is my brand new best friend. There's no website yet but if you drop him an email, he'll get right back to you. Check out some of his flies in the photos. His email is jharford.indy@gmail.com.

They also sponsor Jay Anglin of Anglin Outdoors. Jay is always fun and if you can’t find him you can find his wife. Jay is one of the best largemouth bass anglers that I know of but he’s not bad at steelhead, or smallmouth bass either. And if you want to go musky hunting, he’ll go there too. And here’s what I like best, one of the best storytellers I know. He’s a fine guide too. You can check out his website: www.anglinoutdoors.com

I had a good time with the boys from Stealth Craft, who build sleds and drift boats and are just good guys from Michigan. You might not be in the market for a drift boat or a sled but if you're thinking about a boat here's their site: www.stealthcraftboats.com.

I got to visit with Matt from Driftless Angler ( www.driftlessangler.com ) who always has an interesting selection of fishing related stuff from custom mugs to recycled wader bags and the ubiquitous stuffed pink squirrel. Yep, there's a photo of that in here as well. You would be ill equipped if you fished the driftless region without a dozen pink squirrels.

AY6V0344_1.jpg

I took a break and sat at Austin Adduci's booth and tied flies and made believe that for a moment I was a guide. Sorry Austin!  I handed out his business cards and explained that all I did for Austin was wash the boat. However I talked about the hot lunch, the great fishing and pointed out that the table covering was what Austin is best known for, carp fishing. He also fishes the Kankakee for smallmouth. I'm prejudiced because Austin is a friend of mine and he's on the water every day that he can but there's more to a person than can they fish. So if you have one of his cards and are thinking, "I'd like to go to Beaver Island, or maybe fish the Kankakee," then go visit his site, Grab Your Fly Charters and check out the photos and stories.

My friend Paul Transue, now the owner of Schmidt's Outfitters, was there and if you're looking for a place that has it all: lodge, fly shop, casting pond, guides, Bob Clouser's fly fishing class and so on, then check them out at: Schmidt's Outfitters . I know Paul and his crew and I guarantee you a good time and if you bring your wife, she’ll have a good time to as there is more to do than just go fishing.  

Near the end of the show I visited with Tony Ferrie and his wife Kim at the Simms booth, it's always good to see them and talk about the new products that Simms is introducing. My one complaint about the show came while standing there because they turned the lights off so that the screens being used for the presentations could be seen. It's hard to take pictures in the dark and even more difficult to show off your products in the dark. But I got to look at the boot and wader line and the new line up of women's products, and I was very impressed. I came back when the lights were on and tried on the sling pack and looked at their new line of fishing shirts. As always, with Simms the quality is top notch and they’ve got some flip flops that I’m going to get for summer.

I wound up at Kevin Feenstra's booth near the end of the day. He was running the video of his new DVD, Striking Steel, and I had a chance to strike up a conversation with him, not so much about fishing but about camera gear and shooting video. This was my first time meeting him and first impression is: good guy, savvy about media and a very knowledgeable fisherman and innovative fly tier. I am looking forward to fishing with him and making sure that my cameras are secure! www.feenstraguideservice.com

There are a lot of people that I met that day, Jim Shulin, partner in Temple Fork Outfitters, who'd come to the show from Dallas and showed me their new prototype fiberglass rod and talked about the growth of the company and the people who work there.  www.tforods.com

Greg Senyo tied up one of his minnow patterns and I had hoped to spend more time but was impressed when he handed it off to a teenager who'd just started tying. In fact I was even more impressed by the number of teenagers that I saw at the show.  www.steelheadalleyflytying.blogspot.com

If you throw big streamers, you’ll want to visit www.anglerschoiceflies.com, some of nicest looking streamers I’ve seen come from the vise of Mike Schmidt. All of his flies are custom tied and if you have a pattern and can’t find it, call Mike. If you’re also looking for wet flies, call Mike. Saltwater, yep, call Mike.

Like most shows, if you were new to fly fishing, you could get a good idea of what you’d need to get started as well as learn about casting and fly tying. If you’re an experienced fisher, than it was a good place to sit and watch presentations, talk to guides, book a trip, cast a rod, buy tying materials or equipment at show specials and see where fly fishing is going. There are those who predict that it’s in dire straits, at this show, it looked just opposite and everyone talked about what a good year, in spite of the weather, that they’d had.

While the show wasn't wall to wall people, it was well attended and the facilities were adequate. My only complaint was the lights being turned off and some of the vendors being in the dark. I think they'll figure that out next year. And hopefully the weather will be better.

Saturday was a good day to drive home. Gordy was waiting for us at his guard post in the window.